項目時間：2016-03 - 2017-05
項目名稱：Rapid Order for RO 08, 09, 10, 18, 19.
項目描述：
項目介紹
Products description:
1. Fitting with Gr. A105, LF2, WPB, WPL 6W with sour sour service with Max OD size DN1950.
Responsibilities:
1.Documents review and submission,
2.WPS review and submission.
3.Heat treatment procedure review and submission.
4. Production procedure (including coating procedure) review and submission.
5. NDT procedure review and submission.
6. ITP review and submission.
7. Review and submit procedure for preservation, Protection and Packing
8. Review and submit HIC report.
9. Review and submit MDR after completion of order.
10.MTC review and submission.
On site quality control,
1.Witness chemical and mechanical test, make a comparison between chemical analysis of raw material on the MTC and products analysis to keep traceability.
2. Witnessed heat treatment process to verify the temperature and hold time as per requirement.
3.Witnessed RT and MT testing.
4. Dimensional and visual inspection.
5. Marking, color coding and packing verification.
6. Witnessed container loading process.
我的職責
項目時間：2017-05 - 至今
項目名稱：滾珠絲杠進給系統神經網絡模型自適應控制方法研究
項目描述：
項目介紹
1. 基于Matlab/Simulink，采用PID與NNMRAC并行控制方法；
2. 收集實驗結果作為訓練神經網絡的數據，通過仿真和實驗驗證，驗證提高跟蹤精度這一目的。
我的職責
項目時間：2016-01 - 2016-03
項目名稱：三偏心蝶板的有限元分析及優化
項目描述：
項目介紹
-基于Ansys，分析三偏心蝶板的總變形和等效應力，通過多參數優化方法，在不增加蝶板體積的前提下，使最大變形量減少10%。
我的職責
項目負責人
與公司溝通需求；實際優化零件；報告書寫。
項目時間：2015-03 - 2015-06
項目名稱：降低IQC內部低級錯誤流出次數
項目描述：
項目介紹
QCC品質改善圈，與工藝技術、生產等人員共同改善，由IQC原流出低級錯誤32次/月降為4次/月，在公司項目評比中獲得一等獎
我的職責
QCC圈長，負責項目整體協調與推進
